Showing 385–408 of 1502 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Hemi-Pelvis left w/ vise attachment Ø52mm
Left Hemi-Pelvis with vice attachment, Acetabular diameter 52mm
4022
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 52mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis left w/ vise attachment Ø54mm
Left Hemi-Pelvis with vice attachment, Acetabular diameter 54mm
4023
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 54mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0040-5-03
- Orientationneutral
- Model Typeintact
- Dimensions300mm x 150mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 5 PCF / 0.08 g/cm3 (ISO 1183), Compressive strength: 0.7 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis left w/vise attachment Ø56mm
Left Hemi-Pelvis with vice attachment, Acetabular diameter 56mm
4024
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 56mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Meniscus Puck intact
Meniscus Puck with no tears made from silicone and fabric matrix
PR2120
- Orientationleft
- Model Typeintact
- DimensionsLength: 95mm Width: 53mm Height: 15mm
- MaterialSilicone with fabric matrix
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 42 PCF 150x50x50
SYNBONE foam block series 42 PCF in defined dimensions
0040-42-10
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 50mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density:41.82 PCF/0.67 g/cm3 (ISO 1183), Compressive strength:15-20 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
9410
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 122mm. Length: 119mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis right w/ osteophytes a/ vise attachement Ø52mm
Right Hemi-Pelvis with osteophytes acetabular diameter 52mm and a posterior holding block.
4522.12
- Orientationright
- Model Typeintact
- DimensionsAcetabular Diameter: 52mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis right w/ osteophytes a/ vise attachement Ø48mm
Right Hemi-Pelvis with osteophytes acetabular diameter 48mm and a posterior holding block.
4520.12
- Orientationright
- Model Typeintact
- DimensionsAcetabular Diameter: 48mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis right w/ osteophytes Ø52mm
Right Hemi-Pelvis with osteophytes, acetabular diameter 52mm.
4532.12
PRINT
PR0020
- Orientationneutral
- Model Typeintact
- Dimensions100 x 100 x 30mm, Density: 0.19g/ccm
- MaterialLight cortical bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1501.M1
- Orientationneutral
- Model Typeintact
- DimensionsLength: 363mm Width: 95mm Thickness: 28mm
- MaterialPUR
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Radius right malunion w/ radiopaque coating
Right Radius with a malunion on the distal end with radiopaque coating
7150.9
- Orientationright
- Model Typeintact, malunion
- DimensionsLength: 246mm. Shaft diameter: 13mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Meniscus Puck intact w/ simulated Tibial Plateau
Meniscus Puck intact made with silicon, fabric matrix and simulated rigid tibila plateau.
PR2121
- Orientationleft
- Model Typeintact
- DimensionsLength: 95mm Width: 53mm Height: 15mm
- MaterialSilicone with fabric matrix
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Generic bone w/ midline slit
Generic bone with single midline slit cut into both ends. Outer Ø 25mm and inner Ø 16mm
0056
- Orientationneutral
- Model Typecut
- DimensionsTube diameter: 25mm, Canal diameter: 16mm, Length: 400mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Spine cervical C1-T1 Occiput w/ spinal cord
Cervical Spine with occipital bone, vertebrae C1 to T1, sewable spinal cord with dura mater
LD9391.8
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 265mm
- MaterialOcciput: solid foam, C1 to T1: Solid foam Low Density. Disk: soft flexible foam. Spinal Cord: gelling agents. Dura: PE
- DeliveryDelivery time upon request
PRINT
Generic bone fractured a/ pre-drilled
Generic bone with rubber band and 6 pre-drilled holes
0062
- Orientationneutral
- Model Typefractured, pre-drilled canal
- DimensionsTube diameter 25mm. Canal diameter 9mm. Length: 400mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0063
- Orientationneutral
- Model Typecut
- DimensionsTube diameter 25mm. Canal diameter 9mm. Length: 400mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0064
- Orientationneutral
- Model Typefractured
- DimensionsTube diameter 25mm. Canal diameter 9mm. Length: 400mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
0080
- Orientationneutral
- Model Typeintact
- DimensionsLength: 380mm. Diameter: 25mm
- MaterialModified osteoporotic bone-like PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 30 PCF 150x100x50
SYNBONE foam block series 30 PCF in defined dimensions
0040-30-02
- Orientationneutral
- Model Typeintact
- Dimensions150mm x 100mm x 50mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 30 PCF / 0.47 g/cm3 (ISO 1183), Compressive strength: 10-15 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Scapula left recon
Left Scapula with cancellous bone under glenoid fossa. Hard Cortical. Designed for joint reconstruction workshops
LSH5600
- Orientationleft
- Model Typeintact
- DimensionsLength: 200mm, Width: 140mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0952.06
- Orientationleft
- Model Typefractured
- DimensionsLength: 100mm, shaft diameter: 7mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Meniscus Puck w/ defects
Meniscus Puck with 3 total defects simulating various meniscus tears made from silicone and fabric matrix
PR2120.01
- Orientationleft
- Model Typeintact
- DimensionsLength: 95mm Width: 53mm Height: 15mm
- MaterialSilicone with fabric matrix
- DeliveryEst. Ready to be shipped within 15 working days