X Remove
PRINT
Femur large left recon
Left large Femur with pre-drilled Ø12mm canal on distal side sealed
LSH2335
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical hard density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
Equine Forelimb left w/fractures 10 a/ soft tissue
Equine Forelimb with all bones from distal Radius to DIP, with hoof, soft tissue and with fracture 10
0130.1.15
- Orientationleft
- Model Typefractured
- DimensionsOverall length: 552mm
- MaterialSolid foam / Cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 30 working days
X Remove
PRINT
9225
- Orientationleft
- Model Typeintact
- DimensionsOverall length: 200 mm / width : 140 mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
Tibia left lateral plateau fractured
Left Tibia with lateral plateau fracture and proximal canal opening
PR0737.01
- Orientationleft
- Model Typefractured
- DimensionsLength: 385mm, Tibia plateau width: 79mm, Shaft diameter: 30mm, Canal diameter: 8mm
- MaterialCortical / hard cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
Femur medium left recon
Left medium Femur with pre-drilled Ø12mm canal on distal side sealed
LS2340
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm. Condylar width: 79mm. Neck angle: 128°. Anteversion: 11°. Head diameter: 45 mm. Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
0050
- Orientationneutral
- Model Typeintact
- DimensionsTube diameter: 25mm, Canal diameter: 16mm, Length: 400mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 10 working days
X Remove
PRINT
Canine Tibia right w/ fused fibual a/ valgus
Right Canine Tibia with mid-diaphyseal valgus malformation, with cancellous bone and fused Fibula.
PR2021
- Orientationright
- Model Typeintact
- DimensionsLength: 190mm, Shaft diameter: 14mm.
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
X Remove
PRINT
Canine Tibia right w/ fused fibula fractured
Right Canine Tibia with cancellous bone, canal, distal fractured and fused Fibula
0814.01
- Orientationright
- Model Typefractured
- DimensionsLength: 190mm, Shaft diameter: 14mm, Canal diameter: 4mm
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
X Remove
PRINT
Femur large right recon
Right large Femur with pre-drilled with Ø16mm canal distal sealed
LS2625
- Orientationright
- Model Typeintact
- DimensionsLength: 490mm, Condylar width: 95mm, Neck angle: 105°, Anteversion: 15°, Head diameter: 53 mm, Canal diameter: 15-16mm
- MaterialCortical soft density / low cancellous bone structure
- DeliveryEst. Ready to be shipped within 10 working days
X Remove
PRINT
Tibia medium left recon
Left medium Tibia with pre-drilled canal Ø12mm and distal sealed
LS1365.01
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 397mm. Tibial plateau width: 74mm. Canal diameter: 12mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
LS2016.36.NH.24
X Remove
PRINT
Generic bone to perform tibial cut w/ cancellous part
Generic bone for tibial cut training with cortical and cancellous bone structure
1902.103
- Orientationneutral
- Model Typeintact
- DimensionsLength: 250mm; Dimensions: AP 48 mm / ML 77mm
- MaterialCortical foam with soft cancellous part
- DeliveryEst. Ready to be shipped within 10 working days
X Remove
PRINT
Femur medium right recon
Right medium Femur with pre-drilled with Ø14mm canal distal sealed
LSH2643
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm, Condylar width: 75mm, Neck angle: 130°, Anteversion: 15°, Head diameter: 46 mm, Canal diameter: 14 mm
- MaterialCortical hard density / low cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
X Remove
PRINT
Femur medium right recon w/ notch
Right medium Femur with pre-drilled with Ø14mm canal distal sealed with notch
LS2643.NH
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsLength: 450mm, Condylar width: 75mm, Neck angle: 130°, Anteversion: 15°, Head diameter: 46 mm, Canal diameter: 14 mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
X Remove
PRINT
Hand and wrist right single bone
Intact right single bone Hand with flexible joints and Radius and Ulna. With canals in the area of Metacarpal bones and Proximal Phalanx. Ideal for joint reconstruction and plating and screwing.
9060
- Orientationright
- Model Typeintact
- DimensionsOverall length: 460mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
Canine Femur right fractured as nonunion case
Fractured right Canine Femur with long oblique comminuted fractures and with additional Ø2.5mm screw holes to mimic an nonunion case
0806.02.12
- Orientationright
- Model Typefractured
- DimensionsLength: 220mm +/- 1mm, Shaft Diameter: 17mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
Pelvis Intact, L4/L5, proximal femur w/ radiopaque coating a/ covered w/ soft tissue a/ skin
Intact Pelvis with L4-L5 and proximal femur, radiopaque coating with soft tissue cover and skin
4205.9.1
- Orientationneutral
- Model Typeintact
- DimensionsLength: 540mm, Width: 330mm, Height: 220mm
- MaterialPelvis: Solid foam, dense cancellous bone Soft Tissue: PUR Foam
- DeliveryEst. Ready to be shipped within 20 working days
X Remove
PRINT
Foot 4-part right large
Right large 4-part Foot with talus, calcaneus, lateral and medial forefoot section
9130
- DimensionsLength: 280 mm
- MaterialCalcaneus: Cortical density / low cancellous bone structure ; Forefoot sections: solid foam.
- DeliveryEst. Ready to be shipped within 15 working days
X Remove
PRINT
Skull Holder w/ Ball Head
Skull Holder with Table Clamp for CMF / NEURO workshops to hold various SYNBONE models in a free selectable position. Exception: Half-shell Skulls CAN NOT be fixed on this Holder. Models are NOT included in delivery.
0038
- Orientationneutral
- Model Typeintact
- DimensionsHeight: 390mm Width: 175mm Depth:80mm
- MaterialAnodised aluminum, stainless steel
- DeliveryEst. Ready to be shipped within 25 working days